Why is My Robot Roborock Not Charging?
If you find yourself pondering the frustrating question, “Why is My Robot Roborock Not Charging?” you’re not alone. Roborock vacuum cleaners have transformed home cleaning with their advanced technology. Encountering charging issues can be a real buzzkill.
In this guide, we’ll delve into the common reasons behind the “roborock s5 max not charging” dilemma, offering insights and troubleshooting tips to help you get your trusty robot vacuum back up and running. Moreover, you’ll explore the most likely culprits that might be hindering your Roborock’s ability to recharge.
As a result, it will ensure your home stays clean and your robot keeps rolling. If you are wondering why your roborock battery not charging, this article will guide you to how you can understand it and solve the issue.
Top 5 Reasons Behind Roborock Not Charging
There are 5 potential motivations behind why your Roborock isn’t charging. It may be the case that the roborock charging dock not working, or the charging points might not be aligned accurately. Apart from these, there are also possibilities that the charging base isn’t working properly, the battery is not ready to hold a charge, or the motherboard is damaged. Here are some reasons that made sense exhaustively, alongside the arrangements:
Roborock Battery Not Charging Due to Filthy Charging Points
- By a long shot, the most well-known reason behind why a roborock battery not charging is because of grimy charging points.
- Dust and other debris will inevitably remain on the robot’s underside as it moves around your home.
Charging Points Not Lining Up Precisely
- Did you notice that your Roborock S5 max not charging?
- You need to ensure the charging points of the vacuum and the base are aligned correctly.
Issues with Your Charging Base
- You need to clean the charging base on both the robot and the charging base.
- But if your Roborock not charging, it may be the case that the charging base is broken.
The Battery Isn’t Charging Any Longer
- We all know that the Roborock vacuum runs on a Lithium-ion battery, and has a restricted life expectancy.
- So if you have been using the Lithium-ion battery for a few years now, it may face certain charging issues.
How to Fix Roborock Battery Not Charging?
If your Roborock S5 Max not charging, this section will guide you in the right direction.
Clean the Charging Points of the Robot and charging Base with Wet Cloth.
- If your Roborock not charging for some time, kindly ensure they have not been corroded.
- There are about six sensors and some bump sensors on the base to clean.
- Ideally, you can use a soggy fabric to remove the difficult dirt accumulation from the vacuum’s charging base.
Remove the Mop When Charging the Roborock
- You may need to remove the mop pad, and check whether it is accurately aligned.
- Nonetheless, a well-known reason for why the charging point doesn’t line up properly is likely because you leave the mop on the robot when it is charging.
Change Your Charging Base
- Kindly check if the charging base is working or not.
- The indicator light on the charging base’s top ought to be ‘Switched On’ without the robot and off with the robot put on it.
- Verify that the charging points are securely aligned.
- Additionally, you can experiment with a different wall outlet.
- You need to get a new charging base if the old one is no longer working.
Replace Your Roborock’s Battery
- Assuming that your roborock not charging, there’s a possibility that the battery has run out of its life and needs to be replaced.
- On Roborock’s website, you can simply purchase a replacement.
Get The Roborock’s Motherboard Replaced
One of the reasons that your roborock charging dock not working, the motherboard might be harmed. So, you have three choices:
- Get the Motherboard’s Defective Component Replaced
- Contact Roborock’s Technical Team for Replacement
- Get the Complete Motherboard Replaced
Factory Reset the Roborock Vacuum
- Hold the ‘Home’ button for nearly 5 seconds.
- Use a thin pin to press the ‘Reset’ button.
- As a result, the lights on the home spot clean button, and power button will be out.
- Then hold the ‘Home’ for 5 seconds until the power button starts to blink again.
- You will hear a voice command saying the reset has begun.
- It will take nearly 5 minutes to restore the initial version.
- Now your Roborock vacuum has been reset to factory mode.
If your Roborock battery not charging and you want to resolve the issue, the above methods will surely help you to do so. Cleaning the charging points, and changing your charging base & Roborock’s battery are some practical ways of resolving this issue. Apart from these, you can also factory reset the Roborock, and get the motherboard replaced.
Wrapping It Up
There are some issues that happen to practically any battery-controlled gadget. Therefore, the Roborock vacuum cleaner is not an exception. However, it is less likely to occur if the unit is installed and positioned according to the unit’s technical specifications.
Frequently these issues are due to the damaged motherboard, or an expired battery. However, in different cases, it is as simple as resetting the vacuum or cleaning the charging parts is sufficient to fix the issue.
If you are unable to figure out the actual problem or are unable to solve the issue of the roborock charging dock not working, contact our technical team. Our team will help you in the best possible way.
