How to Fix the Roborock Not Connecting to WiFi?
The Roborock robot vacuum is a superior vacuum cleaner which is a user-favorite vacuum. This vacuum provides top-quality and noise-free cleaning. You just need to connect the vacuum to the WiFi to use the vacuum to the best of its ability. The vacuum requires a proper WiFi connection to function effectively. Without a WiFi connection, the vacuum will not work at all. So, when the Roborock is not connected to WiFi, you must fix it. This issue could arise due to several reasons.
If you are facing the Roborock won’t connect to WiFi, don’t worry. We have brought you the ultimate post to help you through this issue. This blog will consist of the causes of why the Roborock does not connect to WiFi. Further, we will go over the methods you can use to fix the issue.
Why is the Roborock Not Connecting to WiFi?
To fix the Roborock won’t connect to WiFi issue, you need to figure out the issue. Some common reasons for the issue are as follows:
Insufficient power source
Low robot battery
Too much distance
Wrong WiFi password
Internal issues with the router
Technical issues with the vacuum
These are some common factors responsible for why the Roborock does not connect to WiFi.
Troubleshooting My Roborock is not connecting to WiFi Issue
By figuring out the issue of the vacuum not connecting, you can troubleshoot it effectively. You can figure out the reason most applicable to you. It’s crucial to fix the issue to connect the vacuum to the WiFi. To resolve the issue, you can follow the below methods:
1. Power On the Router
- The router should have a proper power source to function effectively.
- Without a stable power source, the router will not work and the issue will persist.
- Thus, you must plug the vacuum into a stable electrical outlet.
- Check the current power supply of the router and ensure it’s working.
- Otherwise, you must plug the router into another electrical outlet.
2. Charge the Vacuum
- The robot vacuum also needs a sufficient amount of charge to connect Roborock to WiFi.
- If the vacuum’s battery is low, you cannot connect it to the WiFi.
- Thus, you must charge the vacuum before you connect it to a stable WiFi.
- To send the vacuum to the charging dock, you just need to press the Dock button.
- Then, the vacuum will retreat to the dock and start charging.
3. Inspect your WiFi Source
- The issue could reside within your WiFi device as well causing the connectivity issue.
- You must troubleshoot your networking device properly before you form a connection.
- To fix the router, you need to reboot, firmware update, or reset the device.
- These methods should fix the issues within the router and then you can try to reconnect.
- Now, the Roborock not connecting to WiFi issue should be gone.
4. Move the WiFi Device Closer
- Sometimes, due to too much distance, the Roborock won’t connect to WiFi.
- Thus, you must place the charging dock and the vacuum close to the WiFi.
- You can move the vacuum closer to the router and then connect Roborock to WiFi.
- Otherwise, you can try moving the router closer to the vacuum for the setup as well.
- This should fix the Roborock does not connect to WiFi issue.
5. Signal Strength
Verify that your robot vacuum is within range of your Wi-Fi router. Weak Wi-Fi signals can cause connection problems. If possible, move the vacuum closer to the router during setup.
5. Use the Correct Password
- The incorrect WiFi password can also cause my Roborock is not connecting to WiFi.
- You cannot form a connection between the vacuum and the WiFi with the wrong key.
- Thus, you must use the correct WiFi password while connecting the vacuum to the WiFi.
- Another possibility could be, you have recently changed the WiFi password.
- In this case, you must reconnect the vacuum to the WiFi using the latest password.
- Now, this should eliminate the Roborock won’t connect to WiFi issue.
6. Reboot the Roborock Vacuum
- There could be internal glitches with the Roborock vacuum causing an issue.
- In this case, you can try rebooting the vacuum, as it can eliminate any minor glitches.
- To reboot the vacuum, press the Power button and hold it.
- After 5-10 seconds, you can release the button.
- Give the vacuum some time to cool down.
- Now, the Roborock does not connect to WiFi issue should be gone.
7. Reset the Vacuum
- If none of these methods are working, you must reset the Roborock vacuum.
- The reset will fix all glitches and bugs with the vacuum.
- To reset the vacuum, you need to press the Home button on the vacuum.
- Hold the home button for 3-5 seconds and release it.
- This should restore the factory default settings of the vacuum.
- Now, you can set up the robot vacuum from scratch.
These are the methods you can use to fix the Roborock not connecting to WiFi. Now, the vacuum should have no problem connecting to the WiFi. If there’s any other issue you are having with your vacuum, connect with our team.
